Heating system (heating section) heating system consists of upper heater, lower heater and ventilation system. Mechanical screw on the heater manual height adjustment, lower heater hydraulically driven its height, the material is heated in a high position nowadays heater, heating end heater drops down to the set position. Heater is installed on the back of the heater wiring insulation to ensure the site will not be too high temperatures shorten the life of the heater, the heater is installed on top of the ventilation hood and install pipeline axial fan, so gather in the upper portion of the furnace and the heat generated harmful gases can be exhausted to the outside. The maximum heating area: 2700mm (longitudinal) × 2000mm (lateral); heating element: the lower heater: embedded electric aluminum: quartz heating plate. Distribution zone: In two heating zones around the heater; the heater is divided into two heating zones front and rear, and each area is divided into 16 heating zones. Temperature range: room temperature ~ 300 ℃; Temperature control method: multi-zone time proportional heat control; heating power: **** KW; http://mayu1991619.980789.com/ LSZH cable granulation Machine http://www.pvc123.com/b-mayu1991619/ PVC imitation marble sheet extrusion machine http://m1991619.b2b.chemm.cn/ open mill mixer http://work.1688.com / granulator http://mayu1991619.sooshong.com/ irradiation crosslinked silane crosslinking recycling machine http://m1991619.sooshong.com/ high voltage cable material granulator